|
|||||||
|
|
|
|||||
|
|
|||||||
The Model
The model was built from Perspex and included all the details from the prototype house that could be considered to affect the test. For clarification, wall partitions between the rooms were included to show the limits of each tested room, in each of which there were a number of triangular openings in each wall. The location of these openings determined the location of the pressure taps. Plates 7.5 and 7.6 show the model and its surroundings and the pressure taps in each room.
Overhead view of the model from the south-east
South-western view of the model and the second case study at the back of the house